REDDNet Depot Installation Instructions

From ReddNet
Revision as of 15:45, 31 March 2010 by Wikiadmin (talk | contribs) (Created page with '= Installation instructions = IMPORTANT!!! Do not plug the power cable in until step 5. If you plug the power in before connecting the management network cable, then the IPMI m…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Installation instructions

IMPORTANT!!! Do not plug the power cable in until step 5. If you plug the power in before connecting the management network cable, then the IPMI module will not initialize properly and remote management/KVM will not work.

  1. Unpack the machine, install the rails, and mount in your rack as you normally would.
  2. Plug in network cable to management port.
  3. Plug in appropriate network cables (10 Gb / 1 Gb)
  4. Plug in the REDDNet USB key into a free USB port.
  5. Plug in power cable.
Retrieved from "http://www.reddnet.org/mwiki/index.php?title=REDDNet_Depot_Installation_Instructions&oldid=4089"